Current Location ：
Ready to revolutionize your communication infrastructure?The Redstone Systems DGW100 SIP-ISDN Gateway is a powerful solution for integrating VoIP and legacy PSTN networks.However,achieving optimal performance and reliability requires careful attention to the installation requirements.This comprehensive guide will walk you through everything you need to know to ensure a successful installation of the DGW100.
Environmental Considerations:
Temperature and Humidity:The gateway operates optimally within a temperature range of 0°C to 40°C and a humidity level between 10%and 90%(non-condensing).Avoid exposing the device to extreme temperatures or high humidity levels,as this can damage the hardware and impact performance.
Cleanliness and Ventilation:A clean environment is crucial for maintaining the integrity of the gateway.Dust and debris can cause connectivity issues and reduce the lifespan of the device.Additionally,ensure proper airflow around the gateway to facilitate heat dissipation and prevent overheating.
Power Supplier:The DGW100 supports both AC(100-240V,50/60Hz,1A)and DC(-36 to-72V,2.5A)power supplies.Choose a stable power source that meets the specified requirements to ensure reliable operation.A UPS is recommended for added protection against power fluctuations.
Grounding:Proper grounding is essential for both AC and DC power systems.Connect the gateway's ground terminal to an independent grounding system or the building's protective grounding bar to ensure safe operation and minimize interference.
Electromagnetic Environment:Minimize electromagnetic interference by keeping the gateway away from high-power wireless devices,radar stations,and high-frequency current sources.This will help maintain the quality of voice communication and prevent performance issues.
Other Facilities:Ensure you have a suitable rack with proper ventilation and grounding capabilities to accommodate the gateway.Additionally,prepare the necessary cables(Ethernet,T1/E1,ground,power)for installation and verify access to a PSTN line and a stable IP network connection.
Hardware Installation:
1.Mounting the Gateway:Follow the instructions provided with the DGW100 series chassis to attach the L-shaped brackets to the sides of the equipment.Secure the brackets to the rack using the provided screws,ensuring the gateway is stable and properly aligned.
2.Connecting Cables:
Console(CON)Port:Connect the CON port of the gateway to your computer's RS232 serial port using the provided RJ45-RS232 serial cable.This will allow you to access the local management interface and configure the device.
Ethernet:Use the provided Ethernet cables to connect the ETH1 and ETH2 ports to your network.These ports support dual-LAN redundancy,providing seamless failover in case of a network issue.
T1/E1:Connect the T1/E1 ports to your PBX or PSTN using the appropriate cables.The DGW100 supports up to 120 simultaneous VoIP calls across multiple T1/E1 interfaces.
Grounding:Connect the grounding cable to the grounding terminal on the back of the gateway to ensure proper grounding and minimize interference.
Power:Connect the power cable to the appropriate power outlet,ensuring the voltage and frequency match the specifications of the DGW100.
3.Verifying Installation:After connecting all cables,double-check that everything is securely connected and properly aligned.Ensure that the ventilation openings are clear and that the gateway is stable on the rack.
By following these installation requirements and guidelines,you can ensure a successful and reliable deployment of the Redstone Systems DGW100 SIP-ISDN Gateway.This powerful device will enable seamless integration between VoIP and legacy PSTN networks,enhancing communication efficiency and flexibility for your organization.
Redstone Systems, Inc. founded in Delaware, USA in December 2002, has been the ODM vendor for many well-known communications companies, serving the Southeast Asian market. In 2020, Redstone Systems will begin to return to the North America market with its self-developed brand.
Redstone has a complete product line of intelligent voice gateways, providing IP-PBXs, analog VoIP gateways (FXS/FXO), digital VoIP gateways (E1/T1), border appliances, and session boundary controllers (SBCs).
With advanced technology in digital signal processor (DSP), speech coding and speech processing, as well as efficient operational tools such as cloud remote management, auto provisioning, Redstone gateways are widely used in markets of enterprise communications, cloud communications, call centers, operators’ IMS/SIP trunks, bringing users friendly, efficient and reliable communication experience.
For more information about Redstone, You can follow us on Facebook, Linkedin, and Youtube to be the first to get the latest news.
